sunray monoflo solar pump

home

Sun-Ray

The Monoflo Sun-Ray solar pump has been designed to transfer surface water with the same efficiency and reliability as other Monoflo solar pumps. Available with either a stationary or GPS Tracking array, ranging from 150W to 1575W, the Sun-Ray can deliver very high daily flows up to discharge pressures of 120m.

The highly efficient, helical rotor pump is inherantly self-priming, so the pump can be positioned up to 6m above the water source, allowing the pump to be installed on top of dam walls or on river-banks above the high water mark.

The Sun-Ray is suitable for pumping water from springs, rivers, tanks and dams. It is available with a floating pontoon that has been designed to safely enable the pump to float on a dam or other water source.

The PC (Progressive Cavity) helical rotor pump element used in the Sun-Ray pump is proven to provide maximum water output even in water containing silt or iron oxide, and low pump speed means extended rotor and stator life in abrasive bores.

The PC pump will deliver water with every rotation regardless of speed; on solar, when pump speed will vary with the amount of sun, it is important to get water with every turn of the pump.

All Sun-Ray systems are supplied complete with pre-wired solar modules, array frames, pump element, submersible motor and solar motor controller. The entire package is easy to assemble and all electrical connections are fitted with plugs & sockets, so electrical connections do not require an electrician.

Float and/or pressure switch input enables complete system automation. The Sun-Ray will only pump as long as water is needed and will stop once tanks and troughs are full.

Monoflo Sun-Ray Surface and Floating Pumps

Applications

Features

Monoflo Sun-Ray System Performance Curve

Monoflo High Transfer Solar PumpsBrochure (PDF, 768K)User Manual (PDF, 1.9M)